Marble Refinisher is a water-based mixture of polishing chemicals and microabrasive
powders in a cream form. It is used to remove etching, dullness, watermarks, and
restores the polish of polished marble, limestone and travertine. See
technical data sheet
Recommended For: Polished Marble, Limestone and Travertine.
Removes Dullness & Etching
Use on Polished Marble & Travertine
Polishes Marble to Mirror-Like Finish
Use with Polishing Machines Only
SIZE
PRICE
QUART
$36.00
Technical Data
Product Description:
A water-based specially formulated mixture of polishing chemicals and micro-abrasive
powders in a suspension. It is used to remove etching, dullness, watermarks, and
restores the polish of marble and other calcite stone.
Uses:
For polished marble, travertine, terrazzo, polished limestone, and onyx.
Application:
Apply Marble Refinisher directly over area to be polished. Use approx. ½ - 1 ounce
for 15 sq. ft. area.
Attach a white polishing pad to a standard floor-polishing machine (150 to 350 rpm)
or to a hand held polisher.
Begin polishing by moving the machine across the stone surface. Keep the surface
wet by sprinkling water. The polishing time will vary by type, condition of stone,
and machine used. (Range from 30 to 90 seconds per square foot.)
Cleanup with Stone Cleaner using a sponge, mop or wet vacuum.
Coverage:
400-600 sq. ft. per quart
Expected Wear:
Depends on traffic and type of cleaner used.
Maintenance:
Use Brightstone Stone Cleaner
Handling and Storage:
Store in closed container. Keep in a cool dry area. Do not allow to freeze.
Caution:
KEEP OUT OF REACH OF CHILDREN
If swallowed: Do not induce vomiting; drink large quantities of water.
Eye and skin contact: Flush with water.
Important Notice:
Liability is limited to refund of the purchase price since application of the product
is beyond the control of the manufacturer or supplier. Brightstone recommends testing
any products used on fine stone on a small inconspicuous area to determine its efficacy
or unexpected results.
